Cyclone2 – 45.0mm – 48.0mm

RM50.00

Stock Clearance

SKU: MY KL-48 Categories: , ,

Description

Cyclone2 – 45.0mm – 48.0mm
Made In Korea , This Not a China Parts

20 EffectsFuel Savings
CYCLONE 2,CYCLONE 3 or CYCLONE 5 significantly increases the flame propagation speed, While greatly improving the engine’s efficiency, minimizing CO2 levels and reducing air pollution.Less Pollution
CYCLONE 2,CYCLONE 3 or CYCLONE 5 creates a swirling, fast-burn effect in the combustion chamber. The fine vapor fuel particles allow near-complete combustion, maximizing engine power output and virtually eliminating engine knocking.More Power
CYCLONE’s advanced air-flow dynamics allow near complete combustion, thereby achieving maximum fuel efficiency.Extended Engine Life
With CYCLONE 2,CYCLONE 3 or CYCLONE 5, braking power is improved by the increased negative pressure created within the intake manifold.Improved Braking Power
CYCLONE 2,CYCLONE 3 or CYCLONE 5 improves engine starts in winter, and provides smoother running in summer when the air conditioner is on.Overall Engine Performance
Carbon deposits turns to red hot spots in combustion chamber will ignite fuel with tremendous power can’t resist rush in with normal brake. That unexpected car dash can happen at any kind of car, gasoline, diesel, LPG, manual, auto transmission, turbo, intercooler, new and old.

 

 

Cyclone 2/3/5 Product Specification

The CYCLONE 2,CYCLONE 3 or CYCLONE 5 is a non-moving vortex generator that goes inside your air intake hose, right after your air filter.CYCLONE 2,CYCLONE 3 or CYCLONE 5 produces uniform engine power for each cylinder and piston during combustion. This consistent force eliminates abnormal engine noise and vibration, resulting in smoother operation and longer engine life.CYCLONE 2,CYCLONE 3 or CYCLONE 5 cleans the carbon in the combustion chamber, preventing unburned fuel accumulation or carbon build-up. It eliminates knocking, pre-ignition and dieseling, thereby extending the life of the engine.It is made entirely from stainless steel, requires no maintenance, and only takes a few minutes and a screwdriver to install.

Latest testimonial (Horsepower up 14.7%) Click

“Satu sampel Fuel Saving Devices berjenama: Qmax, Qmax &Guangdao dan Qmax& Cyclone telah dihantar untuk pengujian di SIRIM QAS International Sdn Bhd mengikut spesifikasi pengilang. Nombor Laporan Ujian 2010MA0870, 2010MA0871(A) dan 2010MA871(B) bertarikh 1 Disember 2010”

Peformance improvement – examined and proven by sought after industrial SIRIM QAS certification testing

How does it work?

CYCLONE 2,CYCLONE 3 or CYCLONE 5 with warranty security seal (Original)

CYCLONE 2,CYCLONE 3 or CYCLONE 5 with warranty security seal (Original)

 
What is difference between ordinary air twister compare to CYCLONE 2,CYCLONE 3 or CYCLONE 5?
 
Ordinary Air twister CYCLONE 2,CYCLONE 3 or CYCLONE 5
– Have to modified – No modification
– A few size – Full range of size according air hose diameter
– Aluminum material – Stainless steel material
– Easy to bend or crack – Very strong not easy to bend or crack
– No warranty – With warranty
 
 

 

 

 

 

 

 

In convenient engines, constant vibration can result in serious damage to the power transmission system.
(According to Dr. J.S. Choi of Yonsei University, all materials deteriorate as a result of repeated impart.)

 

 

 

 

Burned piston and rings resulting from carbon deposit and knock cause by incomplete combustion

 

 

 

1mm ceramic honeycomb-type 3way catalyst decreases engine power, and
carbon deposits make it worse, CYCLONE solves this problem and prolongs the life and function of the
3way catalyst.

CYCLONE clean attached carbon deposits on intake valves in an EFI engine .When carbon accumulates on the intake valve in a fuel-injection system, engine stall and hesitation occur and may even lead to valves crack.

 

 

 

 RESULT OF ENGINE DYNO TEST, 1987
BY : Korea National Industral Testing Institute
ITEM : Gasoline and Diesel Engines
RESULTS :
(a) 20% reduction of CO gas emissions while iding
(b) 7%~8% increase in power output with 50% load
     Cyclone 3 Installation GuideFuel Injection/EFI Type

 

Remove air inlet hose, located between throttle body & air filter box. Install the unit, making sure it fits snug & tightly inside of hose. Replace hose & secure clamp.
CAUTION: The “KI” unit must fit the intake hose/tube snugly and should not block any vacuum, crankcase vent, or blow by hoses that lead into the main intake hose/tube in any way. An improperly fitted unit that is not secured inside the intake hose/tube could slip and cause a dangerous open throttle condition. Please wear gloves when installing, product has sharp edges. Keep away from children.

 

 

 

We do not use stock pictures in our listings, you are purchasing ONLY what you see pictured. Nothing more, nothing less.

  • (*In Stock ,Ready Shipping To 1 Malaysia *)
  • (* We Never Show A Parts We Do Not Have Stock !!! *)
    (* We will usually ship within 1 business day of receiving cleared payment. If you are looking to purchase one of these elsewhere, call the company you plan on buying it from and make sure that they have it in stock and can touch it with their hands. Buying from someone who plans to “Dropship” an item this new will likely leave you waiting for a back-order to be filled.*)
  • (*Buy With Us Confidence, We ONLY Sell The Genuine Items From The Genuine Manufacturer, Some Things May Look The Same But They Are Not So Beware ! We Never Sell Fake Parts*)

Refund and Return Policy

All Returns must first be approved by http://wctsmultiservizi.comContact our office for return confirmations.

  • Returned items must be in original packaging in brand new condition.
  • Products that have been used, mounted or installed will NOT be accepted for return.

Return shipping is the responsibility of the sender, and credit will not be given until all returned items are received. Accepted returns will be credited the full purchase price less shipping and handling fees from the original transaction and a 20% restocking fee.

Returned Items will only be accepted for the following:

  • Fitment Issues: If for any reason your purchase does not fit or work on your vehicle we will accept returns if you provided vehicle information with your order. This is the only way that our experts can insure proper fitment for your vehicle. All other fitment issues are the responsibility of the purchaser. We will replace the item in question with an additional shipping and handling fee including the cost of shipping the original item back to us.
  • Wrong Item Received: If for any reason you have received an Item different from what you ordered wctsmultiservizi.com will ship you the correct item at no additional cost to you, and will make all arrangements to ship the incorrect items back to us.
  • Damaged Items: If you receive an Item that is damaged wctsmultiservizi.com will replace the item at no additional cost to you, and will make all arrangements to ship the damaged items back to us.

 

 

 

Comments are closed.